Water pouring over the front edge
Usually: a clog at the downspout, or a gutter too small for the roof above it.
We do: clear and flush; if it overflows clean, upsize to 6-inch gutters and 3x4 downspouts.
Seamless gutters, leaf guards, downspouts and drainage
Gutters that carry the water where it should go
A roof sheds thousands of gallons in a storm; the gutters decide whether it lands in the drain or in the basement. We install seamless aluminum, copper and steel gutters sized to the roof, hang them on fascia we repair rather than hide, add guards that actually keep leaves out, and fix the ones that sag, leak and overflow. Homes and commercial buildings across New Jersey since 1990.
- SeamlessFormed on site to the exact length
- 5" or 6"Sized to the roof, not the truck
- 20–50 yrAluminum to copper
- One crewFascia, soffit and gutters together
- Exterior Services Since 1990
- 30M+ sq ft of Roofing & Exteriors Installed
- 25,000+ Satisfied Clients
- A Legacy of Giving: $1.5M+ Donated
What your gutters need
Repair, replace, guard, or clean
Four kinds of gutter work, and the one your house is asking for.
Repair
Sagging, leaking, overflowing
Re-hung on new hangers, re-sloped, seams and corners resealed, downspouts reattached.
Signs and fixes →
Replace
Seamless gutters sized to the roof
Aluminum, copper or steel formed on site, 5 or 6 inch, heavy-duty hangers, downspouts where the water should go.
New gutters →
Guards
Keep the leaves out for good
Gutter Helmet, micromesh and screen systems matched to your trees and your gutters.
Gutters and guards compared →
Clean & maintain
Twice a year, or on a plan
Gutters and downspouts cleared, flushed and checked, with photos, as a visit or as part of a roof maintenance plan.
How it runs →Signs
What the symptom usually means, and what we do about it
Six things we see most on New Jersey gutters, and the honest answer for each.
Sagging, pulling away from the fascia
Usually: spike-and-ferrule hangers that worked loose, or fascia that rotted behind them.
We do: re-hang on hidden screw hangers every 24 inches; replace the rotted fascia first rather than screw into it.
Drips at corners and seams
Usually: sectional gutters whose seams and mitres have opened.
We do: reseal with gutter-grade sealant; or replace with seamless runs that have no joints to open.
Water in the basement after storms
Usually: downspouts dumping at the foundation, or underground drains that are crushed.
We do: extend or redirect downspouts, add splash blocks or buried drain lines, regrade where needed.
Ice dams and icicles every winter
Usually: heat loss into the attic melting snow that refreezes at the cold gutter; the gutter is the symptom.
We do: insulation and ventilation fixes, ice and water shield at the next roof, heat cable where nothing else will.
Gutters full of shingle granules or seedlings
Usually: an ageing roof shedding, or leaves composting because the gutters never get cleaned.
We do: clean, assess the roof honestly, and fit guards so the next clean is years away.
- Fixing cracks, holes and separated joints
- Re-securing loose or sagging gutters
- Replacing damaged hangers and fasteners
- Re-sloping for better water flow
- Downspout repair, reattachment and extensions
- Minor resection or patching for aluminum, copper or custom systems
- Seamless gutter installation, 5 and 6 inch and commercial
- Leaf guard installation
- Gutter cleaning and flushing
- Fascia and soffit repair behind the gutters
Gutters and guards
Which gutter, which guard, which size
We supply through JayKay Gutter Supply, Alcoa aluminum and Gutter Helmet, and we size the system to the roof area and the pitch above it. These are the choices and when we recommend each.
Seamless aluminum .032 gauge, 5 or 6 inch
Best for: most New Jersey homes; the best value by far.
Why: formed on site to the exact length, no seams to leak, dozens of baked-on colours, never rusts. We use the heavier .032 gauge, not the .027 that dents.
Expected life 20–30 yrCopper half-round or K-style
Best for: historic homes, slate and tile roofs, churches, anyone who wants the gutter to outlast the house.
Why: soldered joints, no paint to fail, a patina that gets better; the right gutter under a slate roof.
Expected life 50+ yrSteel and commercial box gutters, large sizes
Best for: commercial buildings, long runs, heavy roof areas.
Why: galvanized or Galvalume steel in 6 and 7 inch and custom box profiles, with oversized leaders and overflow scuppers.
Expected life 25–40 yrGutter Helmet solid-surface cover
Best for: heavy leaf and pine-needle cover; the "never clean your gutters again" system.
Why: a solid cover that uses surface tension to pull water in while debris slides off; installed under the shingle edge, warranted.
Lifetime warranty on the productMicromesh guards stainless mesh on a frame
Best for: fine debris: pine needles, maple seeds, shingle grit.
Why: stainless mesh keeps everything out and takes the full flow of a downpour; fits existing gutters.
Expected life 20+ yrScreens and the honest option inexpensive guards
Best for: light leaf cover, tight budgets.
Why: aluminum or vinyl screens keep big leaves out and cost little; they still need a look once a year. We tell you when a guard is not worth it.
Expected life 5–10 yr
New gutters
What a gutter replacement includes with us
A gutter is only as good as the slope it hangs at, the fascia it hangs on and the downspout it drains to. We do all three.
- 01Water flow analysisRoof area, pitch and the valleys that concentrate water decide the gutter size, the number of downspouts and where they go.
- 02Fascia firstOld gutters and brackets removed without damage; rotted fascia replaced, soffit ventilation checked, before anything new is hung.
- 03Seamless runs, precision slopeGutters formed on site to each run, pitched to the downspouts, hung on hidden screw hangers every 24 inches, mitres sealed.
- 04Downspouts, guards, test3x4 downspouts where the flow needs them, extensions or drain lines away from the foundation, guards fitted, the whole system water-tested before we leave.
Brands we install
Gutter systems and guards from the names that last
Seamless aluminum and copper gutters supplied through JayKay Gutter Supply and Alcoa, and Gutter Helmet solid-cover guards for homes that never want to clean a gutter again.
Gutter and drain packages
Gold, Platinum and Diamond
Seamless aluminum sized to the roof, leaf protection for wooded lots, or hand-soldered copper for the houses that deserve it.
Diverting rainwater away from the foundation with professional-grade seamless technology
- Gutters: Seamless aluminum gutters
- Hangers: Hidden hanger reinforcement
- Corners: Seal-Flex corner joints
Best for: Standard residential replacements that need a reliable, leak-free solution
Year-round flow, with the drainage system shielded from debris and clogging
- Guards: Micro-mesh leaf screens
- Downspouts: Oversized 3x4 downspouts
- Drainage: Underground extension hook-ups
Best for: Properties surrounded by trees or with high-volume runoff
A lifetime of elegance and durability in premium copper craftsmanship
- Gutters: 16 oz solid copper gutter system
- Joints: Hand-soldered joints and mitered corners
- Mounts: Decorative bracket mounts
Best for: Luxury estates and high-end architecture where aesthetics are paramount
No prices on this page on purpose: every package is scoped and priced after the inspection, and the exact terms go into your written proposal. Bring any other written proposal: same scope, same warranty, we beat it.
Request a Free Estimate →
Why Roof4Roof
Gutters hung by people who also fix what is behind them
Gutter companies hang gutters. We also replace the rotted fascia, vent the soffit, fix the ice dam and tie the drip edge in, because the gutter is part of the roof edge, not an accessory. Four things we do on every gutter job that most crews do not:
- Sized to the roofSix-inch gutters and 3x4 downspouts where the roof area needs them; a five-inch gutter under a big steep roof overflows in every storm.
- Fascia repaired, not screwed intoHangers into rotted wood are a sagging gutter in two years. We replace the fascia and wrap it before the gutter goes up.
- Water sent somewhereDownspouts that end at the foundation are how basements flood. Extensions, drain lines and grading are part of the job.
- The owners' direct line on every documentIssues answered within 48 hours, most within 24. The owners' contact details are printed on every proposal and invoice.
And a share of this job funds a roof for a family in need, through our One4One program.
Our gutter work
Gutters we installed, on the map and in photos
Real jobs from our records. Tap a pin for the details; the documented ones have their own page with every photo.
Case studyLeak Repair After Billboard Removal, Newark Landmark Property
Raymond Blvd, Newark, NJ 07105
Case studySlate Roof & Copper Restoration, Saint George's Church, Maplewood
Ridgewood Rd, Maplewood, NJ 07040
Roof repair & maintenance in Wood-ridge, NJ
Columbia Blvd, Wood-ridge, NJ 07075
Complex Apartment Building Roof Replacement, GAF Weather Watch ice, GAF Timberline HDZ shingles
Palisade Ave, Fort Lee, NJ 07024
Flat roof coating sytem and extensive maintenance in Bayonne
Broadway, Bayonne, NJ 07002
Flat roof replacement in North Bergen, JM modified bitumen Appex 4S
Woodcliff Ave, North Bergen, NJ 07047
Residential gutters: 33 projects → Commercial gutters: 17 projects →
Inspect, then decide
How a gutter job runs with us
Step 01
01Inspect
Gutters, downspouts, fascia and drainage checked for sag, clogs, leaks and pitch; where the water goes when it lands. Free, with photos and a written report.
Step 02
02Propose
Repair or replace, the size, material and colour, the guard system, the fascia work, the warranty and the price, in writing.
Step 03
03Build
Old system down, fascia repaired, seamless runs formed on site and hung, downspouts routed, guards fitted. Most houses in a day.
Step 04
04Protect
Water-flow test, closeout photos, warranties in writing, and a cleaning or maintenance plan if the trees call for one.
Cost & financing
What gutters cost in New Jersey
Linear feet, storeys, material, the number of downspouts and corners, fascia repairs and the guard system decide the price. These are honest ranges from our own jobs; your written estimate is free and exact.
- Gutter repair and cleaning
- Cleaning $150–$350 · repairs $250–$900 by scope
- Seamless aluminum gutters
- Typically $12–$20 per linear foot installed; most homes $1,800–$4,500
- Copper gutters
- $40–$70 per linear foot installed, half-round or K-style
- Gutter guards
- Screens from $6 per foot · micromesh $15–$25 · Gutter Helmet quoted per home
100% financing
Financing options →
Pay for the gutters the way that suits you
Residential financing through Service Finance Company for qualified applicants, including same-as-cash and fixed-rate plans. Gutters, fascia and soffit can go in the same package as a roof or siding.
Financing options →
Gutters with the roof are cheapest: the fascia is open and the drip edge goes in together.
FAQ
Gutter questions, answered straight
What New Jersey homeowners ask us before they sign.
Have a question not listed here? Call (201) 267-3000 or request an estimate.
01Why do gutters matter so much?+
They move the water a roof sheds away from the walls and the foundation. Without them, or with them clogged, water runs down the siding, into the basement, under the slab and into the fascia and soffit. Most of the rot we repair started with a gutter.
02Seamless or sectional?+
Seamless, always. Sectional gutters from a store have a joint every ten feet and every joint eventually leaks. Seamless gutters are formed on site to the exact length of each run, with joints only at the corners.
03Five-inch or six-inch?+
Five-inch is the residential standard and fine for most roofs. Steep roofs, large roof areas and the valleys that concentrate water need six-inch gutters and 3x4 downspouts, or they overflow in every heavy storm. We size from the roof, not from habit.
04Are gutter guards worth it?+
Under trees, yes: they save the twice-a-year cleaning, keep the gutters flowing and keep ladders off the house. Which guard depends on the debris: a solid cover like Gutter Helmet for leaves, micromesh for pine needles and seeds, a simple screen for light cover. In the open, they are not worth the money and we say so.
05How often should gutters be cleaned?+
Twice a year without guards, spring and autumn, and after a big storm. With guards, a look once a year to check the downspouts and the guard itself.
06How long do gutters last?+
Aluminum 20 to 30 years with cleaning and the occasional re-hang; copper 50 years or more; steel 25 to 40. The hangers and the fascia usually give out before the gutter does.
07Who supplies your gutters and guards?+
JayKay Gutter Supply and Alcoa for aluminum, copper and seamless systems, and Gutter Helmet for solid-cover guards, with micromesh and screen options for lighter debris.
08Where do you work?+
Homes across Northern and Central New Jersey, including Bergen, Hudson, Essex, Passaic, Morris, Union, Middlesex, Somerset, Hunterdon and Sussex counties. Commercial gutters and drainage across the whole of New Jersey.
Reviews
From people whose roof edges we fixed
★★★★★
"The team at Roof4Roof is professional, quick to respond, efficient, well priced and a pleasure to work with. Thank you for a beautiful new roof and soffit!"
★★★★★
"Roof4Roof was very professional, the employees were courteous and respectful with my property. The job was completed on time. All debris was cleaned and removed from the job site. We would not hesitate to recommend Roof4Roof."
★★★★★
"Good quality and good service at a great price. Special thanks go to John, who provided a lot of useful suggestions and made sure the workers did a good job."
One4One
A share of every job funds a roof, a repair or a home for a family in need, in New Jersey and abroad: $1.5M+ donated and 1,300+ families helped since 2010.
How One4One works →
Free estimate
Find out where the water is going
An inspection of the gutters, the fascia and the drainage, a written report with photos, and a proposal with the size, the material, the guards and the price spelled out.