Panels loose, rattling or gone after wind
Usually: vinyl nailed too tight or too loose, or old aluminum whose clips let go.
We do: re-hang the panels with the right nail gap, replace the missing ones with a matched colour, lock the courses.
Vinyl, insulated vinyl, fiber cement, wood (cedar, redwood, pine) and metal siding
Siding that keeps the water out, not just the paint on
We specialize in the diagnosis, installation, repair and replacement of all siding types: vinyl, insulated vinyl, fiber cement, wood and metal. Get top insulated solid-core vinyl from our Window Depot USA of North Jersey partner, with the weatherproofing under it done as carefully as the finish you can see.
- Since 199035+ years on NJ exteriors
- All typesVinyl, insulated vinyl, fiber cement, wood, metal
- Every 3–5 yrInspection, cleaning and maintenance recommended
- 100%Financing for qualified homeowners
- Exterior Services Since 1990
- 30M+ sq ft of Roofing & Exteriors Installed
- 25,000+ Satisfied Clients
- A Legacy of Giving: $1.5M+ Donated
What your siding needs
Repair, replace, or restore what you have
Three kinds of siding work, three different answers. We tell you which one the house actually needs, in writing, after looking behind a panel or two.
Repair
Fix the damage, keep the siding
Vinyl, fiber cement, wood or aluminum: cracked, loose or warped panels, storm damage, water behind the siding, rotted trim.
Siding repair →
Replace
Insulated vinyl, new house wrap, new trim
Full tear-off, flashing and wrap done right, then Mastic vinyl, insulated vinyl or James Hardie fiber cement in the colour and profile you choose.
Siding replacement →
Choose
Five materials, three packages
Vinyl, insulated vinyl, fiber cement, wood and metal: what each one does, and the Gold, Platinum and Diamond packages.
Compare the materials →
Around it
Soffit, fascia, trim, gutters
The edges are where siding fails. We do them with the siding, as one job, with one crew and one warranty.
The whole envelope →Repair
What the symptom usually means, and what we do about it
Siding rarely fails across a whole wall. It fails at a corner, a window, a seam or a panel that took a hit. These are the six we see most on New Jersey houses.
Warped, buckled or melted vinyl
Usually: panels nailed tight with no room to move, or sun reflected off a neighbour's window.
We do: replace the affected courses, hang them properly, and talk about a darker heat-rated panel or a screen if reflection is the cause.
Water inside near a window or door
Usually: missing or badly lapped flashing and house wrap behind the siding, not the siding itself.
We do: open the wall, flash the opening properly, repair the wrap, re-side the area. The repair most companies skip.
Rotted trim, fascia or corner boards
Usually: wood trim that was painted over the rot for years, with the siding butting into it.
We do: replace the trim in PVC or coated aluminum so it never rots again, and reseal the siding to it.
Cracks, holes, dents
Usually: ladders, hail, a lawn mower, a woodpecker.
We do: replace the panel or the shake, match the colour and profile, and, on aluminum, repaint the section if a match no longer exists.
Faded, chalky or streaked walls
Usually: age on vinyl and aluminum, mildew on the north side, or failed paint on wood and fiber cement.
We do: soft-wash, and repaint fiber cement, wood and aluminum where it makes sense; replace vinyl that has gone brittle.
- Vinyl and aluminum panel replacement and re-hanging
- Warped or buckling siding corrected
- Cracks, holes and dents in all siding types
- Flashing and house wrap repairs behind siding
- Repairs at windows, doors, chimneys and roof lines
- Trim, soffit and fascia repair and replacement
- Colour matching and replacement of faded sections
- Sealing against water and insect intrusion
- Storm, ladder, landscaping and pest damage
- Leak investigation from the inside out
What we install
Vinyl, insulated vinyl, fiber cement, wood and metal
Our crews specialise in the diagnosis, installation, repair and replacement of all siding types, with insulation and radiant barrier upgrades on offer to improve energy efficiency, curb appeal and property value. The fascia and soffit are done with the siding, in aluminum, vinyl or composite.
Vinyl
Mastic Carve Wood™ traditional vinyl
Classic looks with modern durability and zero maintenance: a deep wood-grain texture for an authentic carved-wood appearance without the rot, custom trim around every window, door and opening, and never a paint brush again.
- Deep wood-grain carved-wood texture
- Custom exterior trim at every opening
- New high-capacity seamless gutters included in the Gold package
- Never needs painting
Insulated vinyl
Mastic double-insulated high-performance panels
The thermal performance system: a foam insulation backing built into every panel cuts energy bills and dampens outside noise, on walls that often have no insulation at all. All the old siding is removed and disposed of, then the panels go on with precision, top-level craftsmanship.
- Built-in foam insulation backing
- Lower energy bills, quieter rooms
- Old siding fully removed, wall wrapped and flashed
- Precision installation for ultimate weather protection
Fiber cement
James Hardie planks and shingles
Cement, sand and cellulose pressed into planks, panels and shingles that do not burn, rot, warp or feed insects, with a baked-on colour that carries a 15-year finish warranty. Heavier and more demanding to install than vinyl, which is why it is installed over a rain screen with every cut sealed.
- Lap siding, shingle and board & batten profiles
- Non-combustible, Class A fire rating
- ColorPlus® factory finish, 15-year finish warranty
- 30-year non-prorated substrate warranty
Wood
Classic cedar, redwood and pine
Real wood clapboard, shake and board & batten, installed, repaired and refinished: the material historic districts ask for and the one that rewards a maintenance schedule. We replace rotted boards, flash the openings properly and stain or paint to a finish that lasts.
- Cedar, redwood and pine clapboard, shake and board & batten
- Rotted boards replaced, openings flashed
- Stained or painted, finish renewed on a schedule
- Repairs matched to the existing profile
Metal
Steel and aluminum siding, standing seam and corrugated
Factory-finished steel or aluminum panels for modern homes, garages, workshops and commercial walls: the longest-lasting siding we install and the easiest to keep clean. Vertical standing seam, corrugated or horizontal profiles, flashed like a roof so the wall drains.
- Steel, aluminum and insulated metal panels
- Kynar® finishes that keep their colour for decades
- Fire, insect and rot proof; recyclable
- Repairs and re-fastening of existing aluminum siding
Siding restoration packages
Gold, Platinum and Diamond
Three ways to re-side a house, from classic vinyl to fiber cement, with the trim, the flashing and the weatherproofing done as one job. We recommend a professional inspection, cleaning and maintenance every 3 to 5 years.
Traditional vinyl: classic looks with modern durability and zero maintenance
- System: Mastic Carve Wood™ traditional vinyl siding
- Gutters: Brand-new high-capacity seamless gutter system included
- Trim work: Custom exterior trim around every window, door and opening
- Visuals: Deep wood-grain texture for an authentic carved-wood look without the rot
Best for: Owners looking for beautiful, cost-effective curb appeal
Upgraded insulated vinyl: the thermal performance system
- System: Double-insulated Mastic high-performance panels
- Prep work: Professional removal and disposal of all existing siding
- Energy savings: Built-in foam insulation backing that cuts energy bills and dampens outside noise
- Installation: Precision top-level craftsmanship for ultimate weather protection
Best for: Owners who want a quieter, more energy-efficient home with a premium finish
The most durable siding and the most distinct curb appeal
- System: James Hardie™ fiber cement full restoration
- Full reconstruction: Old siding removed and damaged sheathing behind the walls replaced
- Structural: Wall imperfections and framing issues corrected before the siding goes on
- Fire and storm: Non-combustible, moisture-resistant, impact-proof
- Warranty: The highest material and workmanship warranties available in the industry
Best for: Luxury estates and high-value properties that want the gold standard in protection
No prices on this page on purpose: every package is scoped and priced after the inspection, and the exact terms go into your written proposal. Bring any other written proposal: same scope, same warranty, we beat it.
Request a Free Estimate →
Replace
What a siding replacement includes with us
Most of the work in a good siding job is invisible when it is finished. The difference between a wall that stays dry for forty years and one that rots behind pretty panels is what happens between the tear-off and the first course.
- 01Tear-off and sheathing checkOld siding removed to the sheathing; soft, rotted or mould-stained sheathing replaced and photographed before anything goes back on.
- 02House wrap and flashingNew weather-resistive barrier lapped the right way, every window and door flashed with self-adhered membrane, kick-out flashing where the roof meets the wall.
- 03Insulation, where it helpsRigid foam or insulated panels over the sheathing for older homes; attic and wall ventilation checked so the wall can dry.
- 04Siding, trim and the edgesPanels hung loose enough to move, corners and J-channel detailed to shed water, PVC or aluminum-wrapped trim, new soffit and fascia, gutters re-hung.
Closeout: the manufacturer warranty registered in your name, our workmanship warranty in writing, the yard magnet-swept, and leftover panels left with you for future repairs.
The whole envelope
Siding is only as good as its edges
Water gets into walls at the places where siding meets something else. We do those places with the siding, as one job, so there is one crew, one schedule and one warranty for the whole wall.
Soffit and fascia
Vented aluminum or vinyl soffit so the attic breathes, aluminum-wrapped or PVC fascia so it never needs paint, gutters re-hung on the new fascia.
Windows and doors
Flashing and J-channel detailed to shed water away from the opening; capping of old wood frames; or new triple-pane windows and entry doors installed in the same job through our Window Depot store.
Roof-to-wall transitions
Step flashing and kick-out flashing where a roof runs into a wall, the single most common source of rotted sheathing we uncover.
Chimneys and masonry
Counterflashing cut into the brick and sealed, stucco and brick repointed where the siding meets them.
Trim, corners and accents
Corner posts, band boards, gable vents, shutters, window surrounds and decorative shake in gables, in matching or contrasting colours.
Gutters and leaders
Seamless gutters and leaf guards sized to the roof, installed after the fascia so nothing is screwed through new siding twice.
Where it comes from
Our own window and siding store, your neighbours' prices
Window Depot USA of North Jersey is part of the Roof4Roof family and sits in our Carlstadt building. It belongs to a national buying network, so the Mastic siding lines, the James Hardie systems and the windows and doors that go in with them are bought at volume and installed by the same crews that do our roofs. One estimate, one schedule, one warranty for the whole exterior.
Why Roof4Roof
A roofer's siding job: the water comes first
Siding crews think about the finish. We think about where the water goes, because we are the ones called when it ends up in the wall. Four things we do on every siding job that most crews do not:
- Every opening flashed, every transition kicked outSelf-adhered flashing at windows and doors, kick-out flashing at every roof-to-wall, photographed before the siding covers it.
- Sheathing replaced, not sided overRot found during tear-off is cut out and replaced the same day, with photos. Siding over soft sheathing is a wall that fails in five years.
- Three layers of supervisionA working foreman on site, a production supervisor who visits at least three times during the job, and a full-time production manager who owns every step.
- The owners' direct line on every documentIssues answered within 48 hours, most within 24. The owners' contact details are printed on every proposal and invoice.
And a share of this job funds a roof for a family in need, through our One4One program.
Our siding work
Siding we finished, on the map and in photos
Real jobs from our records. Tap a pin for the details; the documented ones have their own page with every photo.
Case studyBoard & Batten Siding, Windows & Gutters Makeover, Bogota
341 Linden Avenue, Bogota, NJ 07603
Roof maintenance and/or replacement in Jersey City
Hutton St, Jersey City, NJ 07307
Windows and Doors in Jersey City
5th St, Jersey City, NJ 07302
Roof Drains in Newark
Peck Ave, Newark, NJ 07107
James Hardie Fiber Cement Siding Installation, Bloomfield
Glenfield Rd, Bloomfield, NJ 07003
Johns Manville Modified Bitumen Flat Roof Installation, Glen Rock
Lincoln Ave, Glen Rock, NJ 07452
Inspect, then decide
How a siding job runs with us
Step 01
01Inspect
Every wall, every opening, every transition, and a look behind a panel where we suspect water. Free, with a written report and photos.
Step 02
02Propose
Repair or replace, the material, the colour and profile with samples on the house, the trim package, the warranty and the price, in writing.
Step 03
03Build
Tear-off, sheathing repairs, wrap and flashing photographed, then siding, trim, soffit and fascia. Most houses take three to seven days.
Step 04
04Protect
Walkthrough, closeout photos, manufacturer warranty registered, workmanship warranty in writing, spare panels left for the future.
Cost & financing
What siding costs in New Jersey
Wall area, the number of storeys and corners, the material, the trim package and how much sheathing has to be replaced decide the price. These are honest ranges from our own jobs; your written estimate is free and exact.
- Siding repair
- Minor $350–$800 · typical $800–$2,500 · flashing and sheathing repairs at openings quoted after opening the wall
- Vinyl siding replacement (Gold)
- Most single-family homes $12,000–$25,000 depending on wall area, storeys and trim
- Insulated vinyl replacement (Platinum)
- Typically 20–30% above standard vinyl; national buying power keeps it close to ordinary vinyl prices
- Soffit, fascia and seamless gutters
- Priced per linear foot; lowest when done with the siding
100% financing
Financing options →
Pay for the siding the way that suits you
Residential financing through Service Finance Company for qualified applicants, including same-as-cash and fixed-rate plans. Terms are confirmed in writing before you sign. Windows and doors can be financed in the same package.
Financing options →
Storm damage? We document the walls for your insurer and work with the adjuster.
FAQ
Siding questions, answered straight
What New Jersey homeowners ask us before they sign.
Have a question not listed here? Call (201) 267-3000 or request an estimate.
01Which siding is best for a New Jersey home?+
For most houses, insulated vinyl (our Platinum package): Mastic double-insulated panels add real R-value to walls that often have none, never need painting, handle freeze-thaw and cut outside noise. Traditional Mastic vinyl (Gold) gives the carved-wood look at a lower price; James Hardie fiber cement (Diamond) is the most durable siding we install. We bring full-size samples and show you nearby houses in each.
02How long does siding last?+
The three lines we install are warranted for the life of the home or with a double lifetime warranty, and they do not warp, buckle or sag. Older vinyl typically lasts 30 to 40 years, aluminum 30 to 50, fiber cement 50 or more, cedar 25 to 40 with regular staining. The house wrap and flashing behind any siding decide whether the wall underneath lasts as long.
03Can you side over my existing siding?+
We can, and we rarely recommend it. Siding over old siding hides rotted sheathing, traps moisture and voids most warranties. Tear-off lets us flash the openings and replace what is soft; it is the only way to know what you are covering.
04Will new siding lower my energy bills?+
Insulated vinyl bonds a foam backing to every panel, adding R-value to walls that often have none, and a continuous house wrap cuts drafts. The saving depends on the house; the comfort and quiet in an older home are usually noticeable the first winter.
05Can you match my existing siding for a repair?+
Usually. Vinyl and aluminum are matched by profile and colour from current lines or from salvage; where a colour has been discontinued we take panels from a hidden wall for the visible repair and put the closest match on the hidden side. Aluminum can be repainted to match.
06How long does a siding replacement take?+
Most single-family homes take three to seven days depending on size, storeys and how much sheathing and trim we replace. The house is never left open: each wall is wrapped and dried-in the day it is stripped.
07Do you do the soffit, fascia, gutters and windows too?+
Yes, and we prefer to, because the edges are where siding fails. Vented soffit, fascia board replacement, seamless gutters and guards are done with the siding; triple-pane windows, entry doors and sliding patio doors can be replaced in the same job through our Window Depot store.
08Which brands do you install?+
Mastic by Ply Gem traditional and insulated vinyl, James Hardie fiber cement, cedar, redwood and pine, and steel or aluminum siding, through our Window Depot USA of North Jersey store, with the manufacturer warranty registered in your name.
09Where do you work?+
Homes across Northern and Central New Jersey, including Bergen, Hudson, Essex, Passaic, Morris, Union, Middlesex, Somerset, Hunterdon and Sussex counties. Commercial and multifamily siding across the whole of New Jersey.
Reviews
From people whose homes we re-sided
★★★★★
"The team at Roof4Roof is professional, quick to respond, efficient, well priced and a pleasure to work with. Thank you for a beautiful new roof and soffit!"
★★★★★
"Roof4Roof was very professional, the employees were courteous and respectful with my property. The job was completed on time. All debris was cleaned and removed from the job site. We would not hesitate to recommend Roof4Roof."
★★★★★
"From start to finish this company handled our cornice renovation with care, precision, and enthusiasm. The crew was punctual and professional and the work they did was meticulous. Roof4Roof is excellent, excellent, excellent!"
One4One
A share of every job funds a roof, a repair or a home for a family in need, in New Jersey and abroad: $1.5M+ donated and 1,300+ families helped since 2010.
How One4One works →
Free estimate
Find out what your siding really needs
An inspection of every wall and opening, samples on the house, and a written proposal with the material, the trim, the warranty and the price spelled out.