Peeling paint and soft wood on the fascia
Usually: a gutter that overflowed for years, or no drip edge, so water ran behind the gutter into the board.
We do: replace the rotted fascia, add drip edge, wrap or replace in PVC, re-hang the gutter.
The roof edge: soffit, fascia, rake and exterior trim
The edge of the roof is where the house breathes, and where it rots
Fascia holds the gutters, soffit lets the attic breathe, and trim seals every place the siding stops. When they fail, water gets into the rafter tails, animals get into the attic and the paint never stays on. We repair and replace soffit, fascia and trim in vented aluminum, PVC and wrapped wood, with the gutters, the roof edge and the siding they meet, on New Jersey homes since 1990.
- Since 199035+ years on NJ exteriors
- VentedSoffit that actually moves air
- No paintAluminum and PVC that never rot
- One crewFascia, soffit, gutters, drip edge
- Vented airflow & moisture control
- Rot & insect-resistant materials
- Seamless gutter & fascia integration
- Precision material & colour matching
What the roof edge needs
Repair the rot, replace the run, vent the attic, finish the trim
Four kinds of roof-edge work, and the one your house is asking for.
Repair
Rotted fascia, loose soffit, peeling trim
Rotted sections cut out and replaced, loose panels re-secured, joints sealed, the gutter re-hung on sound wood.
Signs and fixes →
Replace
New soffit and fascia around the house
Vented aluminum or vinyl soffit, fascia wrapped in coil aluminum or replaced in PVC, new drip edge and gutters.
What a replacement includes →
Ventilation
Intake at the eaves, exhaust at the ridge
Vented soffit and baffles so the attic breathes; the fix for ice dams, hot upstairs rooms and short-lived shingles.
Materials and venting →
Trim
Rakes, corners, window and door surrounds
Wood trim wrapped in aluminum or replaced in PVC so it never needs paint; colour-matched to the siding.
Trim options →Signs
What the symptom usually means, and what we do about it
Six things we see most at New Jersey roof edges, and the honest answer for each.
Sagging or stained soffit panels
Usually: an ice dam or a roof leak at the eave that soaked the soffit from above.
We do: fix the roof edge first, replace the panels, and vent the soffit so it dries.
Squirrels, birds or wasps in the attic
Usually: an open soffit joint or a rotted corner they chewed through.
We do: close the gaps with new vented panels and trim, screen the vents, repair the damage inside.
Ice dams and icicles every winter
Usually: no intake ventilation at the eaves, so the attic is warm and the roof melts snow that refreezes at the edge.
We do: vented soffit with baffles above the insulation, ridge venting, and the eave sealed at the next roof.
Hot upstairs rooms, short-lived shingles
Usually: the same thing: an attic that cannot breathe cooks the shingles from below.
We do: intake at the soffit and exhaust at the ridge, balanced to the attic's size.
Trim that needs painting every few years
Usually: bare wood rakes, corners and surrounds that take the weather first.
We do: wrap in coil aluminum or replace in PVC, colour-matched, so the painting stops.
- Soffit and fascia board replacements
- Wood, vinyl or aluminum trim repair
- Custom trim colour and material matching
- Repair of rotted or water-damaged sections
- Storm and wind damage restoration
- Seamless gutter and fascia integration
- Ventilation and moisture-control improvements
- Rake, corner, window and door trim
- Drip edge and gutter apron
- Preventive maintenance and inspections
Materials
Which material for which part of the edge
We install Azek PVC and Mastic aluminum and vinyl components, chosen because they do not warp, rot or feed insects and never need paint. These are the parts and what each one gets.
Vented aluminum soffit the standard
Best for: nearly every house: intake ventilation and a finish that lasts.
Why: perforated panels move air into the attic, baked-on colour, never rots, matches aluminum fascia and gutters.
Expected life 30+ yrVinyl soffit budget and colour match
Best for: homes with vinyl siding that want the soffit to match exactly.
Why: vented or solid panels in the siding's colour line; lighter and cheaper than aluminum.
Expected life 25–30 yrAluminum-wrapped fascia coil stock over wood
Best for: sound wood fascia that just needs to stop being painted.
Why: custom-bent coil aluminum over the board, with a drip edge above and the gutter hung through it.
Expected life 30+ yrPVC fascia and trim Azek and similar
Best for: replacing rotted fascia, rakes, corner boards and surrounds for good.
Why: cellular PVC cuts and installs like wood, holds paint if you want colour, and cannot rot. The right answer for the pieces that failed.
Lifetime material warrantyWood, repaired and sealed historic homes
Best for: houses where the profile and the look have to stay original.
Why: rot cut out, epoxy consolidation, matched mouldings, primed on all six sides. Needs paint every 7 to 10 years and we say so.
Expected life 20+ yr, maintainedVentilation intake and exhaust
Best for: every attic. The soffit is only half the system.
Why: vented soffit for intake, baffles so insulation does not block it, ridge vent for exhaust, sized to the attic. Fixes ice dams and extends the roof.
Balanced to the attic area
Replacement
What a soffit and fascia replacement includes with us
The roof edge is one assembly: rafter tails, fascia, drip edge, gutter, soffit and the trim that closes it. We replace it as one assembly, which is why it stays dry.
- 01Gutters down, rot outGutters removed and saved or replaced; rotted fascia and rafter tails cut back to sound wood and sistered or replaced; the old soffit removed.
- 02Ventilation set upBaffles installed between the rafters so attic insulation cannot block the intake; ridge or roof vents checked so the air has somewhere to go.
- 03Fascia and soffit onNew or wrapped fascia with drip edge above it; vented soffit panels in J-channel and F-channel, corners and returns finished; rakes and trim wrapped or replaced to match.
- 04Gutters back, sealed, testedGutters re-hung on hidden hangers into the new fascia, downspouts reconnected, every joint sealed, the edge water-tested before we leave.
Why Roof4Roof
A roofer's roof edge: the drip edge goes in, the attic breathes
Siding and gutter crews wrap fascia over rot and nail solid soffit over a sealed attic. We do the roof edge the way a roofer needs it to work. Four things we do on every soffit and fascia job that most crews do not:
- Rot replaced, never wrapped overAluminum over a rotted board hides the rot for exactly as long as the gutter holds. We cut it out and replace it first.
- Drip edge and gutter apronMetal under the shingle edge and over the fascia, so water goes into the gutter, not behind it. Most fascia rot is a missing drip edge.
- Ventilation that is actually openVented soffit is useless over insulation that blocks it. Baffles go in, and the intake is matched to the exhaust at the ridge.
- The owners' direct line on every documentIssues answered within 48 hours, most within 24. The owners' contact details are printed on every proposal and invoice.
And a share of this job funds a roof for a family in need, through our One4One program.
Our exterior work
Exteriors we finished, on the map and in photos
Real jobs from our records. Tap a pin for the details; the documented ones have their own page with every photo.
Case studyChimney Leak & Interior Structural Repair, Verona
Oakridge Rd, Verona, NJ 07044
Case studySlate Roof & Copper Restoration, Saint George's Church, Maplewood
Ridgewood Rd, Maplewood, NJ 07040
Case studyBoard & Batten Siding, Windows & Gutters Makeover, Bogota
341 Linden Avenue, Bogota, NJ 07603
Residential, Chimney Refresh in Union City
23rd St, Union City, NJ
Condo Association, Deck and Roof Renovation, Making Roofs Safer in Jersey City
Sherman Ave, Jersey City, NJ 07307
Shingle Roofs in Waldwick
Harrison Ave, Waldwick, NJ 07463
Residential exterior improvements: 38 projects → Commercial exterior improvements: 21 projects →
Inspect, then decide
How a soffit and fascia job runs with us
Step 01
01Inspect
Fascia probed for rot, soffit and vents checked, the attic looked at from inside for airflow and moisture. Free, with photos and a written report.
Step 02
02Propose
Repair or replace, the materials and colours, the ventilation plan, what happens to the gutters, the warranty and the price, in writing.
Step 03
03Build
Gutters down, rot out, baffles in, fascia and soffit on, trim wrapped, gutters back. Most houses in one to three days.
Step 04
04Protect
Water-tested, closeout photos, warranties in writing, and a note of the one thing that keeps a roof edge alive: gutters that are cleaned.
Cost & financing
What soffit, fascia and trim cost in New Jersey
Linear feet, storeys, how much rot has to come out, the material and whether the gutters are replaced at the same time decide the price. These are honest ranges from our own jobs; your written estimate is free and exact.
- Fascia and soffit repairs
- Small sections $400–$1,200 · one full side $1,200–$3,000
- Soffit and fascia replacement, whole house
- Typically $8–$20 per linear foot installed; most homes $3,000–$8,000 in aluminum
- PVC fascia and trim
- Priced per linear foot above aluminum wrap; lifetime material
- Rake, corner and window trim wrap
- Priced per opening and per linear foot
100% financing
Financing options →
Pay for the edge the way that suits you
Residential financing through Service Finance Company for qualified applicants, including same-as-cash and fixed-rate plans. Soffit and fascia go in the same package as a roof, siding or gutters.
Financing options →
With a roof replacement the fascia is already exposed; that is the cheapest time to do it.
FAQ
Soffit and fascia questions, answered straight
What New Jersey homeowners ask us before they sign.
Have a question not listed here? Call (201) 267-3000 or request an estimate.
01What are soffit and fascia?+
The fascia is the board at the edge of the roof that the gutters hang on; the soffit is the underside of the overhang between the fascia and the wall. Together they close the roof edge against water and animals and, if the soffit is vented, let the attic breathe.
02How do I know mine need repair?+
Peeling paint, soft or stained wood at the gutter line, sagging or missing soffit panels, animals getting into the attic, mould on the underside, ice dams every winter. A screwdriver pushed into the fascia tells us the rest.
03Can soffit and fascia help with attic ventilation?+
They are most of it. Vented soffit is the intake; the ridge vent is the exhaust. Without intake the attic overheats in summer, cooks the shingles, and in winter melts the snow into ice dams. We balance both when we replace the soffit.
04Which material should I choose?+
Vented aluminum soffit and wrapped or PVC fascia for most houses: no paint, no rot, matched to the gutters. Vinyl where the siding is vinyl and the colour has to match. Wood only where a historic profile has to stay, with the painting that comes with it.
05Are soffit and fascia included in a roof replacement?+
They can be, and that is the best time: the gutters are off and the edge is open. We inspect them on every roof job and quote the repair or replacement alongside, so the new roof drains into something sound.
06How often should trim be inspected?+
Once a year, before winter and after any big storm: paint, sealant and any wood that is still exposed. Wrapped and PVC trim needs a look, not a brush.
07Which brands do you install?+
Azek cellular PVC for fascia and trim and Mastic aluminum and vinyl soffit, fascia and trim components, chosen for resistance to warping, rot and insects and for the colour ranges that match our siding and gutters.
08Where do you work?+
Homes across Northern and Central New Jersey, including Bergen, Hudson, Essex, Passaic, Morris, Union, Middlesex, Somerset, Hunterdon and Sussex counties. Commercial and multifamily exteriors across the whole of New Jersey.
Reviews
From people whose roof edges we rebuilt
★★★★★
"The team at Roof4Roof is professional, quick to respond, efficient, well priced and a pleasure to work with. Thank you for a beautiful new roof and soffit!"
★★★★★
"From start to finish this company handled our cornice renovation with care, precision, and enthusiasm. The crew was punctual and professional and the work they did was meticulous. Roof4Roof is excellent, excellent, excellent!"
★★★★★
"Work was done on time as promised. The staff was very polite and professional. Work area was left very clean and neat. I had no problems with this project, they handled everything."
Brands we install
Mastic aluminum soffit, fascia and trim
Mastic by Ply Gem aluminum soffit, fascia and trim coil in the full color range, matched to the siding and the gutters so the roofline reads as one piece.
One4One
A share of every job funds a roof, a repair or a home for a family in need, in New Jersey and abroad: $1.5M+ donated and 1,300+ families helped since 2010.
How One4One works →
Free estimate
Find out what is behind the peeling paint
An inspection of the fascia, the soffit and the attic, a written report with photos, and a proposal with the materials, the ventilation plan and the price spelled out.